Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Reset the tire warning light on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Tires
Operation: Reset the tire warning light on Ford Focus

For this tutorial it is not only valid for Ford Focus but also for other Fords built in the same years. Turn on the instrument panel but not the engine and with the left rod of the steering wheel scroll through the various pages of the panel itself, using the "menu" button. Once you have reached the tire pressure page, press and hold the button located on the end of the aforementioned dipstick, until the reset is complete. Before carrying out the reset, remember to check the condition and measure the tire pressure using a special pressure gauge. Good job!


Posted on 14 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2018-2025 - What to do when the tire sensors of the Ford Focus are not detected? Read Answer
    • Focus 2018-2025 - What to do if the tire pressure sensor does not work in the Ford Focus? Read Answer
    • Focus 2011-2018 - How to turn off the tire warning light on Ford Focus? Read Answer
    • Focus 2011-2018 - When does the tire warning light come on on a Ford focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos