Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you can see how to reset the service on a Ford Kuga by following a few simple steps. First, get into your vehicle, ensure all doors are closed, insert the key, and turn on the instrument panel completely.

Simultaneously, press the accelerator pedal and the brake pedal, holding them down for at least 15 seconds. At this point, you will notice that the maintenance indicator turns off. Next, release the pedals and turn off the instrument panel; turn it back on to check that it is functioning correctly.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light in a Ford Kuga?
How to Reset the Service Light in a Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) This tutorial explains how to reset the service light in a Ford Kuga, a very simple and quick operation to perform only after completing all schedule…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) The procedure to manually reset the service light on your second generation Ford Kuga is quite simple. Below are the steps you need to follow. First,…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To reset the service light on a Ford Kuga, ensure that the necessary servicing operations have been carried out at a garage for the vehicle's circula…

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer
    • Kuga 2008-2012 - What can cause the Ford Kuga engine warning light to come on? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos