Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the key battery on a Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Using the small button on the remote, remove the cover with the Ford emblem from the remote, as shown in the video. Once done, you can also extract the manual spare key located inside (to use if you need to start the car and the battery is flat).

At this point, use a small flat screwdriver to pry open the seams of the remote and separate it into two halves. Here is the battery! Now, simply pry underneath it to remove it and then replace it. Reassemble everything.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
How to Start the Ford C-Max if the Key Battery is Dead
How to Start the Ford C-Max if the Key Battery is Dead
Ford C Max (2010-2019 / MK 2) In this video, you will learn how to start the Ford C-Max in an emergency; specifically, how to start the keyless car if the key battery is dead and …
How to Replace the Cabin Filter on the Ford C-Max?
How to Replace the Cabin Filter on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the cabin filter on the Ford C-Max, you need to completely detach the panel located on the left side of the front passenger footwell: here…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos