Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start the Ford C-Max if the Key Battery is Dead

Model: Ford C Max MK 2 - Years 2010-2019
Part: Key

In this video, you will learn how to start the Ford C-Max in an emergency; specifically, how to start the keyless car if the key battery is dead and cannot start the vehicle. If it is so dead that you cannot even open the doors, you need to extract the metal key from its slot. Once done, remove the plastic cap from its position and insert the remote into the slot you will find. Now the car will be able to start, and you can drive away. Replace the remote battery as soon as possible to avoid unpleasant issues.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Start the Ford C-Max Even if the Key is Not Recognised or is Flat
How to Start the Ford C-Max Even if the Key is Not Recognised or is Flat
Ford C Max (2010-2019 / MK 2) In this video, see how to proceed if your C-Max does not recognise the key: if when starting the vehicle it indicates that no key is detected, the wa…
How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
How to Reset the Service Light on the Ford C-Max
How to Reset the Service Light on the Ford C-Max
Ford C Max (2010-2019 / MK 2) Let's see how to reset the service light on a Ford C-Max. Turn on the ignition without starting the engine, just the ignition on. Press the brake ped…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos