Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery on a Ford Focus MK1

Model: Ford Focus MK 1 - Years 1998-2004
Part: Key

In this video tutorial, you will learn how to disassemble and replace the battery of the remote key for a first-generation Ford Focus in simple steps. First, take your remote control and use a sharp object to pry open the designated hole, as shown in the video; after removing the key from the remote, open the remote into two parts to access the chip and battery. At this point, remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V). Insert it in the correct orientation and reassemble everything!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Fob Battery for a Ford Focus
Replacing the Key Fob Battery for a Ford Focus
Ford Focus (2011-2018 / MK 3) Below are the steps to disassemble and replace the battery of the key fob for a Ford Focus. First, take your key fob and start by removing the rear c…
Replacing the Key Battery for Ford Focus and Mondeo
Replacing the Key Battery for Ford Focus and Mondeo
Ford Focus (1998-2004 / MK 1) In this video, you will see how to replace the battery in the remote key of a Ford Focus, as well as in the Mondeo and other models from the manufact…
Replacing the Key Fob Battery on a Ford Focus Mk2
Replacing the Key Fob Battery on a Ford Focus Mk2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, see how to disassemble and replace the battery of the key fob on a second-generation Ford Focus by following these simple ins…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos