Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Headlight Bulb on a Ford Kuga.

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

In this guide, see how to replace the front headlight bulb on a Ford Kuga. Start by extracting the position light by pulling it with a bent key, as shown at minute 0:20. At this point, you will need to unscrew the top screw and unclip the two lower hooks.

Then, disconnect the connector and remove the entire headlight unit.

Now, extract the bulb; unscrew the two screws on the sides of the holder, rotate it slightly counter-clockwise, and pull it out. Insert the new bulb and refit it, closing the two screws. At this point, reinsert the headlight, reconnect the connector, secure it with the screw and the two hooks, and reinsert the position light.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
How to Change the Fog Light Bulb on a Ford Kuga?
How to Change the Fog Light Bulb on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) Fog lights are extremely important, especially when visibility is low due to adverse weather conditions. If you need to replace them, this guide will…
How to replace the license plate light bulb of a Ford Kuga?
How to replace the license plate light bulb of a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the license plate light bulb of a Ford Kuga, start by opening the rear hatch to access the license plate area. Once opened, locate the lic…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos