Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Filter on a Ford Explorer

Model: Ford Explorer MK 5, U502 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Changing the engine oil filter and the oil itself is very important to maintain the health of the car and increase its durability. Ensure the engine is off and, importantly, cold to avoid any hazards.

Go underneath the car, locate the oil sump, and remove the bolt using a 15 mm spanner. Position a container directly underneath and allow all the used oil to drain out. Once done, refit the bolt.

The oil filter is also located in front of the oil sump. Remove it and replace it with a new one. Next, return to the front of the bonnet, locate the oil reservoir, and fill it with new engine oil. Refit the cap and close the bonnet.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Where is the oil filter located in the Ford Explorer?
Where is the oil filter located in the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this video, you can see where the oil filter is positioned in the Ford Explorer. As shown, it is located in the typical position underneath the ve…
Fuse Box of a Ford Explorer
Ford Explorer (2006-2010 / MK 4, U251) This useful video shows the location of the two fuse boxes in our Ford Explorer, Sport Trac model, produced from 2006 to 2010. As seen in the tutoria…
Where is the OBD port located on the Ford Explorer 2008?
Ford Explorer (2006-2010 / MK 4, U251) In the following guide, we will describe all the steps you need to follow if you need to locate the OBD port in the cabin of your 2008 Ford Explorer.…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos