Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disconnect the Heater Hoses on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Heater core

Before you can start, open the bonnet of your Ford Focus. The heater radiator is located at the rear of the engine bay. To disconnect the two hoses attached to it, release the respective clips. Rotate them clockwise by ninety degrees to unclip successfully. At this point, to disconnect the hoses, simply pull them towards you to remove them from their fittings. Once you complete this step, you will have successfully disassembled it.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Conditioning Radiator on a Ford Focus MK3
How to Replace the Air Conditioning Radiator on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this video, we will see the main steps to remove and replace the heater radiator of the Ford Focus MK3 in simple steps. First, get inside the vehi…
Replacing the Radiator Fan on a Ford Focus
Replacing the Radiator Fan on a Ford Focus
Ford Focus (1998-2004 / MK 1) Follow this simple guide to remove and replace the cooling radiator fan on a Ford Focus. First, lift the vehicle and remove the oxygen sensor from th…
Replacing the Thermostat on the Ford Focus 1.6 - 1.8 TDCI
Replacing the Thermostat on the Ford Focus 1.6 - 1.8 TDCI
Ford Focus (1998-2004 / MK 1) In this video, find the instructions that will allow you to remove and replace the thermostat on the first series Ford Focus, both with the 1.6 and 1…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus heating radiator located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos