Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shocks on the Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Suspension system

In this brief and simple guide, follow the steps to remove and replace the rear shocks on the Ford F-250. First, lift the vehicle and start by loosening the lower bolt of the suspension; then repeat the same process to remove the upper bolt, as shown in the video. At this point, remove and replace the shock with a new one that is the correct type for your vehicle; then reassemble the suspension and perform the same operation to replace the other rear shock!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shocks on the Ford F-250
How to Replace the Front Shocks on the Ford F-250
Ford F-250 (2011-2016 / P473) In today's video tutorial, follow the step-by-step instructions to remove and replace the front shocks on the Ford F-250. First, lift the vehicle and…
How to Replace the Rear Headlight in a Ford F-250
How to Replace the Rear Headlight in a Ford F-250
Ford F-250 (2017-2022 / P558) To replace the rear headlight in a Ford F-250, lower the tailgate to access the side screws securing the headlight. Loosen these screws to extract th…
Replacing the Rear Brake Shoes on the Ford F-250
Replacing the Rear Brake Shoes on the Ford F-250
Ford F-250 (1999-2007 / Phn131) In this guide, learn how to remove and replace the rear brake shoes on the Ford F-250 by following these simple steps. First, lift the vehicle and st…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos