Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shocks on the Ford F-250

Model: Ford F-250 P473 - Years 2011-2016
Part: Suspension system

In today's video tutorial, follow the step-by-step instructions to remove and replace the front shocks on the Ford F-250. First, lift the vehicle and start by loosening the upper suspension bolt using a socket wrench; then, remove the bolt located at the bottom to take it off completely, as shown in the video. At this point, replace the shock with the new one using the original part; follow the video to the end for reassembly, performing the same operation to replace the other shock!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorber on a Ford F-250
How to Replace the Front Shock Absorber on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the front shock absorber on a Ford F-250, first remove all the bolts securing the wheel corresponding to the shock absorber to be removed.…
How to Replace the Rear Shocks on the Ford F-250
How to Replace the Rear Shocks on the Ford F-250
Ford F-250 (1999-2007 / Phn131) In this brief and simple guide, follow the steps to remove and replace the rear shocks on the Ford F-250. First, lift the vehicle and start by loosen…
How to Replace the Alternator in the Ford F-250?
How to Replace the Alternator in the Ford F-250?
Ford F-250 (2008-2010 / P356) To replace the alternator in the Ford F-250, open the hood to access the components inside the engine bay. Disconnect the terminals connected to the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos