Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Shoes on the Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Brake drums and shoes

In this guide, learn how to remove and replace the rear brake shoes on the Ford F-250 by following these simple steps. First, lift the vehicle and start by removing the rear wheel. Then, disconnect the rear cables and unscrew the brake caliper bolts to remove it, as shown in the video. Next, remove the rotor and unscrew the drum bolts; then detach the spring and remove the old brake shoes, cleaning the brake system of dirt. Finally, reassemble everything, following the video tutorial to the end!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on the Ford F-250?
How to Replace the Rear Brake Pads on the Ford F-250?
Ford F-250 (1999-2007 / Phn131) To replace the rear brake pads on the Ford F-250, lift the vehicle so that the wheel corresponding to the brake being replaced is off the ground. Thi…
How to Replace the Front Brake Pads on the Ford F-250
How to Replace the Front Brake Pads on the Ford F-250
Ford F-250 (2011-2016 / P473) In this video, see the procedure for removing and replacing the front brake pads on the Ford F-250. First, lift the vehicle at the front and remove t…
Replace the Front Brake Pads on a Ford F-250
Replace the Front Brake Pads on a Ford F-250
Ford F-250 (2017-2022 / P558) In today's tutorial video, you will see the instructions needed to remove and replace the front brake pads on a Ford F-250. First, lift the vehicle a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos