Do it yourself
| ||||
|
Ford F-150 - Video tutorial
Model: Ford F-150
MK 12
- Years 2009-2014 In this video tutorial you can see how it is possible by following a few simple steps that will guide you towards the correct management of your vehicle. First you need to have the engine oil changed. Then you will notice that the service light stays on. First you have to get into your car and put the handbrake; press the button to turn on the ignition. Next, you have to press the RESET button located in the center where the car radio is also located; at this point the TRIP A item should appear on the display. Now press the SETUP key and the OIL LIFE item and "reset for system check" should appear on the display.
Posted on 15 April 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |