Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Engine Oil and Oil Filter on Ford F-150 5.4L

Model: Ford F-150 MK 11 - Years 2004-2008
Part: Engine oil

In this brief and simple guide, you will learn how to replace the engine oil and oil filter on the Ford F-150 with a 5.4L engine. First, lift the vehicle and start by removing the oil drain bolt located on the oil pan; let it drain into a container for about ten minutes. Now, remove the oil filter cartridge using the appropriate wrench; replace it with the new one, tightening it gently. Finally, remove the fill cap and pour in the new engine oil with the correct viscosity (as indicated in the owner's manual).

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the Ford F-150
How to Change the Engine Oil and Oil Filter of the Ford F-150
Ford F-150 (2009-2014 / MK 12) Below are the steps necessary to replace the engine oil and oil filter while performing routine maintenance on the Ford F-150. First, lift the vehicl…
How to Change the Engine Oil on a Ford F-150?
How to Change the Engine Oil on a Ford F-150?
Ford F-150 (2009-2014 / MK 12) To change the engine oil on a Ford F-150, access the components located underneath the vehicle. Specifically, you will need to unscrew the oil drain …
How to replace the oil pan of the Ford F-150 5.4L
How to replace the oil pan of the Ford F-150 5.4L
Ford F-150 (2009-2014 / MK 12) .. and replacing the oil pan of the Ford F-150 5.4L engine. First, we lift the vehicle and start unscrewing all the fastening screws of the oil.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos