Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Oil Filter of the Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Engine oil

Below are the steps necessary to replace the engine oil and oil filter while performing routine maintenance on the Ford F-150. First, lift the vehicle and start unscrewing the oil drain plug located under the engine, allowing it to drain into a container for about ten minutes; then, use the appropriate wrench to unscrew and remove the oil filter cartridge, as shown in the video. At this point, hand-tighten the new oil filter and finally top off the oil!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford F-150 (2004-2008 / MK 11) In this brief and simple guide, you will learn how to replace the engine oil and oil filter on the Ford F-150 with a 5.4L engine. First, lift the veh…
Ford F-150 (2009-2014 / MK 12) To change the engine oil on a Ford F-150, access the components located underneath the vehicle. Specifically, you will need to unscrew the oil drain …
Ford F-150 (2009-2014 / MK 12) Today's step-by-step instructions will show us the process of dismantling and replacing the oil pan of the Ford F-150 5.4L engine. First, we lift the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos