Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Explorer

Model: Ford Explorer U625, MK 6 - Years 2020-2026
Part: Service warning light

If you have just performed the regular service on your new Ford Explorer but still notice the warning message on the dashboard display, you must perform a manual reset. Fortunately, this is a simple operation that takes only a few seconds to complete. Just carefully read the following mini guide. First, turn on the ignition. Next, enter the menu and select the option related to vehicle maintenance. Choose the reset option and hold down the "OK" button until the operation is complete. Finally, exit the menu and switch off the ignition.

Updated on 11 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Reset the Service Light on a Ford Explorer
Reset the Service Light on a Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) In this very short tutorial, the procedure to reset the service light on a fifth-generation Ford Explorer, produced from 2011 to 2019, is shown. Star…
How to Reset the Oil Light on a Ford Explorer?
How to Reset the Oil Light on a Ford Explorer?
Ford Explorer (2020-2026 / U625, MK 6) The oil light on the Ford Explorer can be reset using only the buttons on the right side of the steering wheel, without the need for a computer. Here…
How to reset the engine malfunction indicator light on the Ford Explorer
How to reset the engine malfunction indicator light on the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) Today we will see the instructions that will allow us to reset the engine malfunction light of the Ford Explorer, as well as on other models of the m…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos