Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Change Light on a Ford Escape

Model: Ford Escape MK 2 - Years 2008-2012
Part: Service warning light

In this video tutorial, you can see how to reset the engine oil change light or maintenance light on a Ford Escape by following a few simple steps that will guide you toward proper vehicle management. The procedure is not difficult; get in the vehicle after performing maintenance. On the driver’s side dashboard, you will see three small buttons, one labeled "SETUP" and the others "INFO" and "RESET". Press the setup button, and a message "Reset for system check" will appear on the display; press "Ok". Continue pressing SETUP to reset the engine oil light and press "OK". HOLD THE RESET BUTTON, and you're done.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Ford Escape?
How to Reset the Oil Change Light on a Ford Escape?
Ford Escape (2013-2019 / MK 3) To reset the Oil Change light on a Ford Escape, enter the cabin and press the accelerator and brake pedals simultaneously. While holding these pedals…
How to Reset the Oil Change Light on a Ford Escape
How to Reset the Oil Change Light on a Ford Escape
Ford Escape (2013-2019 / MK 3) To correctly reset the partial mileage on your Ford Escape, follow these simple steps. First, insert the key and turn it to the first position to pow…
How to Reset the Engine Oil Change Message on the Ford Escape Mk2
How to Reset the Engine Oil Change Message on the Ford Escape Mk2
Ford Escape (2008-2012 / MK 2) This guide shows how to reset the oil change light on the Ford Escape Mk2. This procedure can be performed with the engine running. To complete the p…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos