Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic gearbox on a Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Warning light – error code

If you need to reset the automatic gearbox on your vehicle, follow the steps below. First, access the driver's seat, turn on the ignition without starting the engine, and position the automatic gearbox selector in the neutral "N" position. Wait for at least 15 seconds, then return the gearbox selector to the park "P" position and wait for another 15 seconds. At this point, turn off the ignition and then turn it back on to verify that the reset test has been completed correctly.

Updated on 20 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the oil light on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The following video tutorial explains how to reset the engine oil light on a Ford Kuga model 2, independently. After completing all the steps related…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) When your Ford Kuga indicates, with the activation of the specific light, that it is time for an oil and filter change, it alerts you to perform the …
How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this tutorial, you will see how to remove the oil change light in the Ford Kuga. This simple and quick operation should only be performed after ch…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos