Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform an Oil Change Service on the Ford Figo

Model: Ford Figo MK 1, B517 - Years 2010-2015
Part: Engine oil

Learn how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ford Figo. First, lift the vehicle and start draining the engine oil by removing the drain bolt located on the oil pan, allowing it to drain into a container for about ten minutes; then, use the appropriate wrench to unscrew the oil filter cartridge, hand-tightening the new one before securing it gently. Finally, remove the fill cap and top off with the new oil, ensuring it meets the correct specifications!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Figo
How to reset the service light on the Ford Figo
Ford Figo (2015-2021 / MK 2, B562) Today we will see the instructions that will allow us to reset the service maintenance reminder for the regular oil change of the Ford Figo, in simpl…
How to Reset the Service Light on a Ford Figo.
How to Reset the Service Light on a Ford Figo.
Ford Figo (2015-2021 / MK 2, B562) In this video tutorial, you can see how to reset the maintenance light on a Ford Figo. First, perform maintenance on the vehicle, such as changing th…
How to Change the Engine Oil on a 2015 Ford Figo
How to Change the Engine Oil on a 2015 Ford Figo
Ford Figo (2015-2021 / MK 2, B562) Open the front hood of the Ford Figo by pulling the release lever, then unscrew the cap of the oil reservoir located next to the engine and pour the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos