Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Ford Explorer?

Model: Ford Explorer U625, MK 6 - Years 2020-2026
Part: Air filter

If you need to replace the engine air filter on this vehicle, you can find simple instructions on how to proceed in this description and the video. After opening the bonnet, locate the box containing the filter, which is positioned just behind the radiator. Proceed to unclip the steel clips securing the cover. Then, lift the cover to access the compartment containing the filter, remove the old filter and replace it with the new one, then reposition the cover and reattach the steel clips.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Ford Explorer
How to Replace the Air Filter on a Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) In today's video, see how to replace the air filter on a 2006-2010 Ford Explorer. First, open the front bonnet by pulling the relevant lever inside t…
How to Replace the Air Filter on a Ford Explorer?
How to Replace the Air Filter on a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) To replace the air filter on a Ford Explorer, open the bonnet and disconnect the connectors and the hose attached to the box containing the filter. T…
How to replace the air filter on the Ford Explorer?
How to replace the air filter on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this video, you can see how to replace the air filter on the Ford Explorer, a very simple and quick operation. Start by opening the bonnet and mov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos