Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Rotors on a Ford F-150 MK11

Model: Ford F-150 MK 11 - Years 2004-2008
Part: Brake rotors

Today, follow these step-by-step instructions to remove and replace the rear brake rotors on a Ford F-150 MK11. First, remove the rear wheel by lifting the vehicle; then, remove the rear brake caliper by unscrewing the mounting bolts with a socket wrench, as shown in the video. At this point, hit the brake rotor to loosen it and remove it; then clean off any dirt and install the new brake rotor of the correct type. Finally, replace the brake pads and reassemble everything, following the video to the end!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pump in a Ford F-150 Pickup?
How to Replace the Brake Pump in a Ford F-150 Pickup?
Ford F-150 (2004-2008 / MK 11) In this tutorial, you will see how to replace the brake pump in a Ford F-150 pickup, a straightforward task that requires good manual skills due to t…
Replacing the Headlights on the Ford F-150 MK11
Replacing the Headlights on the Ford F-150 MK11
Ford F-150 (2004-2008 / MK 11) In this video tutorial, you will learn how to remove and replace the headlights on the Ford F-150 eleventh generation. First, open the hood and start…
How to Replace the Instrument Cluster on a Ford F-150
How to Replace the Instrument Cluster on a Ford F-150
Ford F-150 (2004-2008 / MK 11) In this video tutorial, you will learn how to remove and replace the instrument cluster on a Ford F-150 by following the instructions below. First, g…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos