Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How to change the oil on Ford Transit MK7?

Ford Transit - Video tutorial

Model: Ford Transit MK 7 - Years 2006-2014
Part: Engine oil
Operation: How to change the oil on Ford Transit MK7?

In this video we will see how to change the engine oil on a Ford Transit MK7. Before we begin to remove the old oil lift up the oil dipstick and remove the oil plug. We can now raise the van to reach the oil sump, place a pan under the sump and unscrew the cap to let the old oil out. Once the cap has been removed, we also remove the oil cartridge filter and let it drain for a few minutes. Once this is done, clean up any old oil residues, screw the sump cap back on and fit a new filter. After these steps we just have to add some new engine oil and we will have finished the job.


Posted on 20 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Transit 2006-2014 - How many liters of oil should be inserted into the Ford Transit 2011? Read Answer
    • Transit 2006-2014 - How many liters of engine oil are needed for the Ford Transit 2.2 diesel? Read Answer
    • Transit 2006-2014 - How many liters of engine oil are needed to change on the Ford Transit Mk7 3.2? Read Answer
    • Transit 2006-2014 - What is the right amount of engine oil for the Ford Transit 2.5? Read Answer
    • Transit 1994-2000 - How much engine oil is needed in a naturally aspirated Ford Transit 2500? Read Answer
    • Transit 2014-2023 - How many liters of engine oil goes in the Ford Transit Custom? Read Answer
    • Transit 2000-2006 - How many liters of engine oil does the Ford Transit van contain? Read Answer
    • Transit 2006-2014 - How much oil do you need for replacement on the Ford Transit2.2 Tdci? Read Answer
    • Transit 2006-2014 - How much oil does the Ford Transit engine contain? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos