Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service (Oil and Oil Filter Change) on the Ford Transit MK7

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

In this video, find step-by-step instructions to carry out the routine maintenance service by replacing the engine oil and oil filter on the seventh series Ford Transit. First, lift the vehicle and start unscrewing the oil drain bolt found on the sump, using a socket spanner, allowing it to drain into a container for about ten minutes; then proceed to remove the oil filter.

At this point, replace the filter cartridge with the new one, screwing it in and tightening gently. Finally, pour in the new engine oil!


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Perform DIY Maintenance on a Ford Transit
How to Perform DIY Maintenance on a Ford Transit
Ford Transit (1994-2000 / MK 5) This video explains how to carry out a general DIY maintenance service for a Ford Transit. Open the engine bay, remove the oil dipstick, undo the oil…
Engine Oil and Oil Filter Replacement on Ford Transit 2.2 MK7
Ford Transit (2006-2014 / MK 7) In today's tutorial video, you will learn how to replace the engine oil and oil filter on the Ford Transit MK7 with a 2.2 litre engine. First, gather…
How to Replace the Oil Filter on the Ford Transit?
How to Replace the Oil Filter on the Ford Transit?
Ford Transit (2006-2014 / MK 7) To replace the oil filter on the Ford Transit, access the underside of the vehicle, near the oil sump. Once the filter is located, remove it from its…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos