Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform DIY Maintenance on a Ford Transit

Model: Ford Transit MK 5 - Years 1994-2000
Part: Oil filter

This video explains how to carry out a general DIY maintenance service for a Ford Transit. Open the engine bay, remove the oil dipstick, undo the oil cap, and remove the bolt located under the oil sump, but first place a container to collect the old oil. To replace the oil filter, pre-soak the new filter with oil and screw it in by hand. Once the oil reservoir is closed, pour in the new oil. The brake fluid reservoir is also located in the engine bay; undo the cap and use a syringe to remove the brake fluid. For the coolant, the reservoir is in the engine bay; simply undo the cap and pour in the new fluid, preferably blue in colour. An 80 Ah battery is used; always check the battery dimensions. Finally, it is advisable to change the diesel filter every two oil filter changes, as the float of the filter can corrode, and it is always located in the engine bay.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet on a Ford Transit
How to Open the Bonnet on a Ford Transit
Ford Transit (2014-2024 / MK 8) How to open the bonnet on a Ford Transit? Perform maintenance yourself to save on labour costs. Pull the lever located at the bottom left of the dash…
Remove Door Panel on Ford Transit
Remove Door Panel on Ford Transit
Ford Transit (2006-2014 / MK 7) Remove the door panel (front right) of a Ford Transit: using a screwdriver, undo the screws located in the space for the upper door opening lever and…
Where to Find the Fuse Box of the 2002 Ford Transit
Where to Find the Fuse Box of the 2002 Ford Transit
Ford Transit (2000-2006 / MK 6) If you are looking for the fuse box in your 2002 Ford Transit but haven't found it yet, don't worry; just follow the instructions in this mini guide.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos