Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on Ford Transit 2.2 MK7

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oil filter

See other generations:
This video is currently unavailable

In today's tutorial video, you will learn how to replace the engine oil and oil filter on the Ford Transit MK7 with a 2.2 litre engine. First, gather the necessary service kit; then lift the vehicle and start by removing the engine oil drain bolt located on the sump, allowing it to drain into a container for at least ten minutes.

At this point, use the appropriate tool to unscrew and remove the oil filter; then replace it with a new one, hand-tightening before gently tightening further. Finally, pour in the new engine oil!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Perform a Service (Oil and Oil Filter Change) on the Ford Transit MK7
How to Perform a Service (Oil and Oil Filter Change) on the Ford Transit MK7
Ford Transit (2006-2014 / MK 7) In this video, find step-by-step instructions to carry out the routine maintenance service by replacing the engine oil and oil filter on the seventh …
Location of the Fuse Box on the Ford Transit MK7
Location of the Fuse Box on the Ford Transit MK7
Ford Transit (2006-2014 / MK 7) In this short video, you will see the positioning of the internal and external fuse boxes on the 2009 Ford Transit MK7. First, locate the engine comp…
How to Reset the Oil Light on a Ford Transit
How to Reset the Oil Light on a Ford Transit
Ford Transit (2006-2014 / MK 7) This video illustrates the procedure to reset the oil light on the Ford Transit Connect if it does not turn off automatically after an oil change. Th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos