Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light in a Ford Explorer?

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Warning light – error code

In the Ford Explorer, after changing the oil, you need to manually reset the oil warning light. First, start the engine, then press the button located under the speedometer to clear the warning and navigate the display to the settings page. As indicated, hold the button to access it, and similarly, scroll to the oil life page. At this point, press and hold the button again until "100%" is displayed as the remaining oil life. Finally, turn off and then turn on the ignition again to verify that the procedure was successful.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2017 Ford Explorer
How to Reset the Oil Light on a 2017 Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) If you have just changed the oil and the respective filter on your 2017 Ford Explorer Mk5 but the warning light continues to illuminate on the instru…
How to Reset the Engine Oil Life Indicator on the Ford Explorer Mk5
How to Reset the Engine Oil Life Indicator on the Ford Explorer Mk5
Ford Explorer (2011-2019 / MK 5, U502) This guide shows how to reset the engine oil change indicator on the Ford Explorer Mk5. To perform this operation, enter the vehicle with the key and…
How to Manually Reset the Oil Light on the Ford Explorer
How to Manually Reset the Oil Light on the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) To reset the oil change light on your 2017 Ford Explorer, you do not need any diagnostic tools or the assistance of a skilled mechanic. All you need …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos