Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cylinder Head Bolts

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine

See other generations:
Video tutorial

In this tutorial, the cylinder head bolts of a Ford Focus engine are replaced. First, measure the thread of the bolts using a thread gauge.

Using a suitable socket, unscrew and remove the old bolts. Clean their housing with compressed air. After purchasing a new pack of ten cylinder head bolts, use the copper paste included in the kit to lubricate each bolt (as shown in the video) to prevent seizing.

Once each bolt is inserted into its housing, ensure they are correctly tightened using a torque wrench.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to Install a New Cylinder Head Bolt Kit
How to Install a New Cylinder Head Bolt Kit
Ford Focus (1998-2004 / MK 1) This tutorial covers the removal and replacement of the old cylinder head bolts on a Ford Focus. The cylinder head bolts connect the engine block, th…
How to Fit the Cylinder Head Gasket
How to Fit the Cylinder Head Gasket
Ford Focus (2004-2011 / MK 2, Focus 2) This video tutorial shows how to fit new cylinder head gaskets to a Ford Focus. After checking the flatness of the cylinder head base with a thin pla…
Indicator Control Lever Replacement
Indicator Control Lever Replacement
Ford Focus (1998-2004 / MK 1) Replacing the indicator control levers is extremely simple as they are simply clipped in place: start by opening the covers of the indicator unit to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos