Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Low Beam Bulb in a Ford F150

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Headlight bulb

To change the headlight bulb in a Ford F150, do the following: Remove the 3 clips that hold the body protection around the headlight and take it off (also removing the plastic clips visible by pulling outward on the headlight trim). Remove the trim support with the 6 nuts (10mm), one nut (8mm), and one clip, and also remove the other 3 clips. After removing the trim support, take out the 3 bolts that hold the headlight. Remove the cover of the bulb that needs to be changed, rotate the socket with the bulb, disconnect the bulb (avoiding touching the glass), take the new bulb out of the package, and insert it in place of the old one. After changing the bulb, reassemble the headlight by reversing the disassembly steps.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the light bulb of a Ford F150
How to change the light bulb of a Ford F150
Ford F-150 (2009-2014 / MK 12) In this article we will show you how to replace the headlight bulb of the Ford F150. For this operation you will need a 10mm socket wrench and a Phil…
How to replace the fog light bulb on a Ford F150
How to replace the fog light bulb on a Ford F150
Ford F-150 (2009-2014 / MK 12) In this video, we will see how to replace the fog light bulb on a Ford F150: we will easily access it from the front wheel well, which we will have t…
How to Replace the Front Fog Light Bulb on a Ford F150
How to Replace the Front Fog Light Bulb on a Ford F150
Ford F-150 (2015-2020 / MK 13) In today's short and simple video guide, see how to replace the front fog light bulb on a Ford F150 of the thirteenth generation, produced from 2015 …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos