Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on Ford F250 Super Duty p558

Model: Ford F-250 P558 - Years 2017-2022
Part: Diesel fuel filter

This guide shows how to replace the fuel filter on the Ford F250 Super Duty p558. The operation can be performed without lifting the vehicle, given the height of the frame from the ground. On the left side of the vehicle, in the middle, is the fuel tank. First, you need to drain the filter using the valve that needs to be unscrewed. At this point, unscrew the five mounting bolts of the filter and disconnect the electrical cable at the bottom of the element. Remove the block from its seat and replace the filter panel by sliding it sideways. Clean the filter block and reassemble everything in position. From the engine compartment, on the rear right, you need to replace the second fuel filter by first removing the connectors and then the filter block. Turn on the ignition a few times to fill the filters and then run the engine for a few minutes.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Find the Door Code on the Ford F250 Super Duty
How to Find the Door Code on the Ford F250 Super Duty
Ford F-250 (2011-2016 / P473) In this video, learn how to find the door code on a Ford F250 Super Duty. The code is provided at the time of purchase, along with the vehicle's docu…
How to Replace the Front Headlight of the Ford F250 Super Duty P473
How to Replace the Front Headlight of the Ford F250 Super Duty P473
Ford F-250 (2011-2016 / P473) This guide shows how to replace the front headlights of the Ford F250 Super Duty P473. After opening the hood, use a 10mm wrench to remove the 4 bolt…
Where are the fuses located on the Ford Super Duty?
Where are the fuses located on the Ford Super Duty?
Ford F-250 (2017-2022 / P558) The fuses of the Ford Super Duty are located inside the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it will be po…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos