Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How do you replace the Ford Focus oil pump?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Pump
Operation: How do you replace the Ford Focus oil pump?

In order to replace the Ford Focus oil pump it is necessary to lift the car, as this piece will be located in the lower part of the engine compartment, on the side of the timing belt. The pump can then be removed by unscrewing the bolts that secure it to its housing and also disconnecting the oil passage pipes; once the old one has been removed, it will be possible to insert the new one so that it is fixed with the bolts and connected to the appropriate pipes. In this way it will be possible to verify that everything works correctly.


Posted on 5 August 2022 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Focus 2011-2018 - What problems could the Ford Focus injector pump have? Read Answer
    • Focus 2004-2011 - How much is the water pump on the Ford Focus 1.8 TDCi from 2005? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos