Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horns on a Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, see how to replace the horns on a Ford Focus, a very simple operation. First, ensure the key is not inserted, then go underneath the engine bay, lifting the car with a jack and taking all necessary precautions, and remove the protection panel.

Next, locate the horns situated in front of the right wheel, disconnect the power connectors, and unscrew the single fixing bolt. Once done, mount the replacements onto the bracket and reassemble everything by following the reverse procedure.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Why Doesn't the Horn of a Ford Focus Work?
Why Doesn't the Horn of a Ford Focus Work?
Ford Focus (2011-2018 / MK 3) The horn of your Ford Focus has stopped working because the related fuse has likely blown. Consequently, you will need to replace the faulty fuse. St…
How to Remove the Horn (Audible Warning) on a Ford Focus MK3
How to Remove the Horn (Audible Warning) on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's tutorial video, we will see how to remove and replace the audible warning (the horn) on a Ford Focus third generation, following the instr…
Where are the Fuses on the Ford Focus?
Ford Focus (2011-2018 / MK 3) All fuses on the Ford Focus are divided among the designated fuse boxes installed within the vehicle: this model has three boxes. The first is locate…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos