Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Radiator Cooling Fans

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Radiator

See other generations:
Video tutorial

The radiator cooling fan assembly is integrated into a plastic frame fixed to the rear of the radiator through snap-fit plastic tabs: to replace it, simply disconnect the power connector, unclip the fastening tab, and remove the complete frame with fans.

Then proceed in reverse for installation.

This is a readily available aftermarket part at relatively low costs; after installing the new set of fans, ensure they activate once the engine operating temperature of 90°C is reached.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Radiator
Instructions for Replacing the Radiator
Ford Focus (1998-2004 / MK 1) Before proceeding with this maintenance, ensure the engine is cold; then drain the coolant through the drain plug located under the radiator, disconn…
Replacing the Radiator on a Ford Focus
Replacing the Radiator on a Ford Focus
Ford Focus (2011-2018 / MK 3) Want to remove the radiator on a Ford Focus? Here’s how to do it. Lift the bonnet, then remove the air filter housing to access all the radiator secu…
How to Replace the Radiator and Fan on the Ford Focus MK1 2.0 SVT
How to Replace the Radiator and Fan on the Ford Focus MK1 2.0 SVT
Ford Focus (1998-2004 / MK 1) In this video tutorial, you will learn how to remove and replace the radiator and cooling fan on the first generation Ford Focus with a 2.0 SVT engin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos