Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Central Locking on a Ford Focus

Model: Ford Focus MK 4 - Years 2018-2025
Part: Warning light – error code

In this tutorial, you can see how to reset the service light on a Ford Focus 2020 by following a few simple steps that will guide you in managing your vehicle correctly. If this light has come on, you likely need to change the engine oil, so take it to an authorised garage for a service. If you want to do this yourself and reset the engine oil change signal, simply press the accelerator pedal and the brake pedal down fully (this procedure works for both automatic and manual gearboxes), then while holding both pedals, turn the key to switch on the ignition and it will go to 'RESET'. The reset will be completed shortly.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the central locking fuse located in the Ford Focus?
Where is the central locking fuse located in the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the central locking fuse in the Ford Focus, first locate the relevant fuse box: it is positioned below the glove compartment on the passen…
Where is the central locking control module located in the Ford Focus?
Where is the central locking control module located in the Ford Focus?
Ford Focus (1998-2004 / MK 1) This video shows where the central locking control module is located in the Ford Focus, useful in case you need to replace it due to a fault. As show…
How to open the front hood of the Ford Focus
How to open the front hood of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The steps to open the hood of a Ford Focus vehicle are: - insert the opening key into the lock behind the Ford logo on the grille; - insert your hand…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos