Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Service Function on a 2010 Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Warning light – error code

Enter the vehicle and close the doors, press the ignition button (turn on the ignition). The display in the centre of the dashboard will show the message: "oil change service". Press the brake and accelerator pedals down simultaneously and hold them for about 10 to 15 seconds, after which the central display will show the message: "oil change service reset". At this point, you can release the brake and accelerator pedals. Press the ignition button to turn off the ignition. Wait a few seconds and press the ignition button again to check that the service function has been correctly reset.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) In this tutorial, see how to reset the oil service light in the Ford Kuga, a very simple and quick operation to perform only after changing the oil a…
How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this tutorial, you will see how to remove the oil change light in the Ford Kuga. This simple and quick operation should only be performed after ch…
How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
Ford Kuga (2008-2012 / C394, MK 1) Discover the instructions on how to reset the service light for the regular maintenance oil change on the first generation Ford Kuga, in simple and q…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos