Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Ford Transit Custom?

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Ford Transit Custom, insert the ignition key into the ignition switch and turn it to activate the instrument cluster. Then, press and hold the accelerator and brake pedals simultaneously for about 30 seconds.

After this time has passed, release the pedals and turn off the instrument cluster by turning the key. When you turn the ignition back on, you will notice that the Service light has been successfully reset and is no longer present on the instrument cluster.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Ford Transit Custom
How to Reset the Service Light on the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Below are the instructions on how to correctly reset the service light on your Ford Transit Custom. The steps are quite simple and quick as follows. …
How to Reset the AdBlue Warning Light in the Ford Transit Custom?
How to Reset the AdBlue Warning Light in the Ford Transit Custom?
Ford Transit (2014-2024 / MK 8) The video available here shows how to reset the warning light in the Ford Tourneo, but this method is also valid for the Ford Transit Custom. The ant…
How to Reset the AdBlue Warning Light on the Ford Transit Custom?
How to Reset the AdBlue Warning Light on the Ford Transit Custom?
Ford Transit (2014-2024 / MK 8) To reset the AdBlue warning light on the Ford Transit Custom, you need to top up with the necessary amount of additive liquid: to do this, open the f…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos