Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Transit

Model: Ford Transit MK 6 - Years 2000-2006
Part: Service warning light

In this video tutorial, you can see how to reset the service light on the Ford Transit by following a few simple steps. First, perform maintenance on your vehicle, such as an oil change and filter replacements. Get into your vehicle, insert the key, and turn on the ignition without starting the engine. Press the brake pedal and the accelerator pedal simultaneously for at least 15 seconds; at this point, you will see the light flashing and the kilometres reset. Now release the pedals and turn off the ignition; after a few minutes, turn the ignition back on to check the reset.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Transit
How to reset the service light on the Ford Transit
Ford Transit (2000-2006 / MK 6) To reset the service light on a Ford Transit vehicle, model produced from 2001 to 2006, we must: - insert the key; - turn the key to the first positi…
How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2014-2024 / MK 8) The procedure to reset the service light on a 2022 Ford Transit is the same for all Ford Transit models. The process is very simple and quick. The fi…
How to reset the service light on the 2020 Ford Transit Custom
How to reset the service light on the 2020 Ford Transit Custom
Ford Transit (2014-2024 / MK 8) Today, thanks to the following video tutorial, we will illustrate the steps to reset the service light of the 2020 Ford Transit. Before performing th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos