Do it yourself
| ||||
|
Ford Focus - Video tutorial
Model: Ford Focus
MK 3
- Years 2011-2018 The car fuse box is located in the passenger compartment under the dashboard on the passenger side, the fuse diagram is as follows: 56 Not used (spare); 57 Not used; 58 Not used; 59 Passive anti-theft transceiver; 60 Interior lighting, driver's door switch package, glove box lighting, overhead console switch bench; 61 Cigarette lighter, socket; 62 Rain sensor module; 63 – Not used; 64 – Not used; 65 Unlock the tailgate; 66 Unused (spare); 67 SYNC®, multifunction display, global positioning system module, compass; 68 Not used; 69 Instrumentation; 70 Supply of centralized locking and unlocking; 71 Climate control; 72 Flying module; 73 Data link connector; 74 Power supply for dipped beam headlights; 75 Unused (spare); 76 Reversing light power supply, electrochromatic rear view mirror; 77 Windscreen washer and rear window supply rear; 78 Ignition switch, starter button; 79 Radio, hazard light switch, door lock switch, electronic trim panel; 80 Unused (spare); 81 Radio frequency receiver; 82 Rear window relay and windshield washer; 83 Central locking; 84 Unlock supply, double lock; 85 Front seat heating switch; 86 Airbag module, occupant classification sensor, passenger airbag deactivation indicator;.
Posted on 25 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.093
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |