Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on Ford Explorer

Model: Ford Explorer MK 5, U502 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

This tutorial shows how to reset the tyre pressure warning light on a Ford Explorer, model years 2011 to 2019. First, with the instrument cluster on, press the brake pedal firmly to the floor. Now turn the vehicle's ignition on and off three times.

Then, press and hold the brake pedal for three seconds, and finally turn the ignition on and off three more times. After doing this, the tyre warning light will start to flash.

At this point, drive a few miles to turn it off completely.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to reset the tire warning light on the Ford Explorer EV?
How to reset the tire warning light on the Ford Explorer EV?
Ford Explorer (2020-2026 / MK 6, U625) In this tutorial, we can see how to reset the tire warning light in the Ford Explorer EV, a very simple and quick operation that should be done only …
How to Reset the Oil Light on a Ford Explorer?
How to Reset the Oil Light on a Ford Explorer?
Ford Explorer (2020-2026 / MK 6, U625) The oil light on the Ford Explorer can be reset using only the buttons on the right side of the steering wheel, without the need for a computer. Here…
How to replace the cabin filter in the Ford Explorer 6
How to replace the cabin filter in the Ford Explorer 6
Ford Explorer (2020-2026 / MK 6, U625) In this new guide dedicated to your new Ford Explorer Mk6 (2020-2022), discover how to replace the cabin air filter independently and safely. The ent…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos