Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of the Ford Ranger

Model: Ford Ranger T6, P375, PX - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Door trim panel

See other generations:
Video tutorial

In this brief and simple guide, follow the instructions to remove and replace the front door panel of the Ford Ranger. First, open the front door and start unscrewing the fixing screw located on the opening handle; then unscrew the additional screws located on the panel, removing the plastic cover of the grab handle as shown in the video.

At this point, pry at the edges of the panel to detach and remove it, disconnecting the electrical connector of the window switch and the handle cable!


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Ford Ranger
How to Remove the Door Panel of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Below, we will discover the instructions that will allow us to remove the door panel of the Ford Ranger. First, open the front door of the vehicle an…
How to disassemble the front door panel of the Ford Ranger
How to disassemble the front door panel of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) The following steps will show us how to disassemble and remove the front door panel of the Ford Ranger. First, we open the front door of the vehicle …
Replacement of the External Rear-View Mirror of the Ford Ranger
Replacement of the External Rear-View Mirror of the Ford Ranger
Ford Ranger (1998-2011 / MK 3) Below, we will discover the steps to dismantle and replace the external rear-view mirror of the Ford Ranger. First, open the front door of the vehicl…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos