Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Door trim panel

Below, we will discover the instructions that will allow us to remove the door panel of the Ford Ranger. First, open the front door of the vehicle and start by removing the plastic cover of the grab handle; then unscrew the fastening screws found inside and on the opening handle, as shown in the video. At this point, pry at the sides to detach and remove the door panel, disconnecting the handle cable and the electrical connector of the window switch; finally, reassemble the front door panel!

Posted on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of the Ford Ranger
How to Remove the Front Door Panel of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) In this brief and simple guide, follow the instructions to remove and replace the front door panel of the Ford Ranger. First, open the front door and…
Where is the fuse box of the Ford Ranger located?
Where is the fuse box of the Ford Ranger located?
Ford Ranger (1993-1997 / MK 2) To find the fuse box inside your Ford Ranger, you must follow the steps described in this new mini guide dedicated to you. First of all, you must ope…
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos