Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Door trim panel

The following steps will show us how to disassemble and remove the front door panel of the Ford Ranger. First, we open the front door of the vehicle and start by removing the plastic cover of the handle; we unscrew the screws found underneath and the screw located on the handle, as shown in the video. At this point, we pry on the sides until we detach and remove the panel, disconnecting the electrical connector of the window switch and the handle cable; we apply the reverse process to reassemble the panel!

Posted on 8 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the door lock actuator of the Ford Ranger
How to disassemble the door lock actuator of the Ford Ranger
Ford Ranger (1998-2011 / MK 3) In this short guide, we will see the instructions that will allow us to disassemble and remove the door lock actuator of the front door of the Ford R…
Replacement of the front bumper grille of the Ford Ranger
Replacement of the front bumper grille of the Ford Ranger
Ford Ranger (2022-2026 / P703, RA) In this short guide we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Ford Ranger. First, we …
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Ford Ranger (2015-2019 / ) In this video, we will see how to remove the interior light fittings and replace the bulbs on a Ford Ranger T6 and T7 in simple and quick steps. Firs…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos