Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in the Ford Kuga

Model: Ford Kuga MK 3 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

In today's video, see how to remove the service battery in the Ford Kuga. First, obtain a replacement unit in case the part needs replacing. Proceed only when the engine is cold to avoid burns.

Open the front bonnet. Locate the battery position.

Remove the air filter cover if necessary to proceed. Once done, disconnect the connectors as needed to extract the unit.

Replace it with the new unit and reverse the process to reassemble.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Ford Kuga (2020-2026 / MK 3) To replace the battery in a Ford Kuga, open the rear tailgate to access the boot. Inside, lift the carpet to access the spare wheel, which must be re…
Ford Kuga (2012-2019 / MK 2, C520) Today, let's go through the instructions on how to remove and replace the battery in a Ford Kuga by following these simple steps. First, open the bon…
Ford Kuga (2020-2026 / MK 3) To replace the battery in the Ford Kuga remote, slide the button located at the top of the remote to release the key inside. After removing the key, …

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos