Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Today, let's go through the instructions on how to remove and replace the battery in a Ford Kuga by following these simple steps. First, open the bonnet of your car and start by removing the plastic cover of the battery, located near the brake fluid reservoir; then disconnect both battery terminals (positive and negative), as shown in the video.

At this point, remove and replace the battery with a new one of the correct type and the same amperage; reconnect the battery and refit the cover!


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Ford Kuga
How to Replace the Battery in a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To replace the battery in a Ford Kuga, open the bonnet to access the components in the engine bay. The battery is located on the right side and can b…
How to replace the battery in the Ford Kuga?
How to replace the battery in the Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the battery in the Ford Kuga, open the bonnet to access the components located in the engine compartment: on the right side of the compart…
How to Replace the Remote Battery on the Ford Kuga?
How to Replace the Remote Battery on the Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the battery in the Ford Kuga remote, press the button on the top of the device to lift the key. Once the key is lifted, you can pry inside…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos