Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to replace key battery on Ford Escape

Ford Escape - Video tutorial

Model: Ford Escape MK 3 - Years 2013-2019
Part: Key
Operation: How to replace key battery on Ford Escape

If we are having problems opening the door of our car with the remote control, the remote control key battery is probably running low. We will see in these instructions below how to replace it. The first thing to do is to remove the safety key, then use a pointed object to leverage and release the remote control cover. Under it we will find the battery housing and always with a pointed object we can extract it and replace it with a new one. Then remove the cover and place it back over the remote control by applying pressure with your fingers. Finally, take the safety key and reinsert it in its housing and the job will be completed.


Posted on 21 April 2023 by ScegliAuto



How to replace the key battery on the Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the battery in the Ford Escape key, you need to open the key by placing a small screwdriver or a plastic tool in the slot behind the key;
How to replace the key battery on the Ford Escape [USA]
Ford Escape (2013-2019 / MK 3) In order to replace the battery of the Ford Escape remote control key, proceed as follows: with a screwdriver, pry the center line between the two sh
How to change the Ford Escape key battery
Ford Escape (2020-2024 / MK 4) Replacing the button battery inside the smart key of the Ford Escape and all the other models produced in the same period is a very simple operation,

    Frequently Asked Questions

    • Escape 2020-2026 - How do you replace the battery in a Ford Escape remote control? Read Answer
    • Escape 2008-2012 - How to fix Ford Escape door lock problem? Read Answer
    • Escape 2013-2019 - Why does central locking on Ford Escape cause problems? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos