Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Ford Fusion?

Model: Ford Fusion MK 1 - Years 2002-2012
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin air filter in the Ford Fusion, a very simple and quick operation. First, position yourself in the passenger seat, then open the glove compartment and, pressing both sides inward, unclip the drawer from the dashboard. Next, using a flathead screwdriver, release the side clips of the long rectangular cover and open it. At this point, you can remove the old filter and insert the replacement, ensuring it is positioned correctly as indicated along its edge.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter on the Ford Fusion?
How to replace the cabin filter on the Ford Fusion?
Ford Fusion (2002-2012 / MK 1) To replace the cabin filter on the Ford Fusion, you need to detach the rivet that secures the protection panel on the passenger side footwell: once t…
Replacing the Cabin Pollen Filter in a Ford Fusion
Replacing the Cabin Pollen Filter in a Ford Fusion
Ford Fusion (2002-2012 / MK 1) Before proceeding with the replacement of the cabin pollen filter in a Ford Fusion, it is advisable to ensure the vehicle is securely positioned on a…
How to Replace the Pollen Filter on a Ford Fusion
How to Replace the Pollen Filter on a Ford Fusion
Ford Fusion (2002-2012 / MK 1) How to replace the pollen filter on a Ford Fusion? Here’s how to do it: use a plastic lever to detach the cover located at the bottom of the centre t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos