Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seatbelt

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
Video tutorial

This short video tutorial shows the procedure for removing the seatbelt from a Ford Focus. For complete safety, it is recommended to disconnect the vehicle's battery before proceeding.

Using a 15 mm socket wrench, unscrew and remove the bolt at the base of the seatbelt. Lift and remove the upper cover with a screwdriver.

A bolt will be revealed that you need to unscrew with a T15 Torx key. Also remove the two screws that secure the central cover. Take off this cover as well.

Release the metal clip that holds the seatbelt in place. With the T15 Torx key, unscrew the bolt at the bottom: this will be needed to extract the reel.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Replace the Seatbelt on a Ford Focus?
How to Replace the Seatbelt on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To remove the seatbelt on a Ford Focus, use a tool to pry off the trim pieces located along the door pillar. Once the trim pieces are removed, procee…
How to Replace the Seatbelt on a Ford Focus
How to Replace the Seatbelt on a Ford Focus
Ford Focus (1998-2004 / MK 1) First, release the bonnet using the lever and lift it to disconnect the plugs connected to the battery. This prevents any unpleasant issues since the…
How to Replace the Seatbelt on a Ford Focus
How to Replace the Seatbelt on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the seatbelt on a Ford Focus, remove the seals from the front and rear doors. Next, using a socket spanner, loosen the bolt at the bottom …

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos