Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on a Ford Galaxy?

Model: Ford Galaxy MK 3 - Years 2015-2023
Part: Engine oil

To replace the engine oil on the Ford Galaxy, access the underside of the engine bay and locate the oil drain plug, which is in this position: you can then collect the oil in a suitably positioned container. Next to the oil reservoir, you will find the oil filter, which must be removed by turning it counter-clockwise; once the old filter is removed, insert the new one and then top up the oil. This should be added through the designated filler in the engine bay.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil filter in the Ford Galaxy?
How to replace the oil filter in the Ford Galaxy?
Ford Galaxy (2015-2023 / MK 3) In this tutorial we can see how to replace the oil filter in the Ford Galaxy, a very simple and quick operation, which obviously includes the replace…
How to Replace the Oil Filter on the Ford Galaxy
How to Replace the Oil Filter on the Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) To perform this routine operation every so many miles will only take a few minutes. After lifting your vehicle and placing it on suitable stands, you…
How to reset the oil light on the 2018 Ford Galaxy
How to reset the oil light on the 2018 Ford Galaxy
Ford Galaxy (2015-2023 / MK 3) Resetting the oil light on a 2018 Ford Galaxy is a simple and quick operation that can be done independently. To perform the operation, we need to tu…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos