Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a 2015 Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Service warning light

In this guide, discover how to manually reset the engine oil light on the instrument panel of your 2015 Ford Focus. First, enter the cabin and reach the driver's seat. If the ignition is off, turn the key to switch on the dashboard. Next, press the accelerator pedal fully down and then press the brake pedal for about 20 seconds. Finally, wait for the message confirming the reset of the light, and the procedure is successfully complete. You can now turn off the ignition or start driving.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2016 Ford Focus
How to reset the oil light on the 2016 Ford Focus
Ford Focus (2011-2018 / MK 3) In the following guide, we will explain how to correctly perform the manual reset of the oil warning light on the instrument panel of your 2016 Ford …
How to Reset the Oil Light of the Ford Focus 2017
How to Reset the Oil Light of the Ford Focus 2017
Ford Focus (2011-2018 / MK 3) Typically, the oil light that appears on the instrument cluster of your Ford Focus third series (2017) turns off automatically once the oil and its f…
How to Reset the Oil Light on a Ford Focus 3
How to Reset the Oil Light on a Ford Focus 3
Ford Focus (2011-2018 / MK 3) If you have recently changed the engine oil in your Ford Focus Mk3, but the oil warning light continues to stay illuminated on the dashboard, you nee…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos