Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Warning light – error code

This video tutorial shows how to reset the Service light on a Ford Transit produced from 2006 to 2014. This procedure is useful if the light remains on after a service. First, turn on the ignition without starting the engine. Next, press and hold both the brake and accelerator pedals until the spanner light starts to flash. When the light begins to flash, turn off the ignition and release the pedals. Now, turning the ignition back on will reset the light.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (1994-2000 / MK 5) In this tutorial, you will see how to replace the auxiliary belt on a Ford Transit van, a very simple and quick operation. First, ensure that the eng…
Ford Transit (2006-2014 / MK 7) In this tutorial we can see how to replace the service belt in the Ford Transit van, an extremely simple and quick operation. First of all, we lift t…
Ford Transit (2006-2014 / MK 7) .. Let’s see how to reset the service light on a Ford Transit without a display menu. This is the classic Ford system u.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2000-2006 - Where is the radio code located for the Ford Transit 6000 CD? Read answer
    • Transit 2014-2024 - Why does the brake light stay on after a pad change in a Ford Transit? Read answer
    • Transit 2006-2014 - Why is the glow plug light flashing on my Ford Transit? Read answer
    • Transit 2006-2014 - How do you reset the brake pad warning light on Ford Transit Custom? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos