Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Ford Escape 3

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To manually reset the oil light that keeps turning on in the instrument cluster of your Ford Escape Mk3 (2013-2019), it only takes a few seconds. Once inside the cabin, make sure the ignition is off. Then, press and hold both the brake pedal and the accelerator pedal simultaneously, and turn on the ignition.

Wait for the reset to complete successfully, then release both pedals, and the procedure is finally complete. At this point, you are free to drive or turn off the ignition.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to reset the oil light on the Ford Escape 3
How to reset the oil light on the Ford Escape 3
Ford Escape (2013-2019 / MK 3) If you want to manually reset the oil engine light of your third edition Ford Escape, all you have to do is carefully follow the steps described in t…
How to Reset the Oil Light on a Ford Escape
How to Reset the Oil Light on a Ford Escape
Ford Escape (2013-2019 / MK 3) In this mini guide, you will learn how to correctly reset the engine oil change light on a 2019 Ford Escape. The entire operation takes just a few se…
How to Reset the Oil Light on a Ford Escape 3
How to Reset the Oil Light on a Ford Escape 3
Ford Escape (2013-2019 / MK 3) Manually resetting the engine oil light on your Ford Escape Mk3 (2013-2019) is very simple, and with the following guide, you will have no difficulty…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos