Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to reset the Ford Escape oil warning light

Ford Escape - Video tutorial

Model: Ford Escape MK 3 - Years 2013-2019
Part: -board computer
Operation: How to reset the Ford Escape oil warning light

In this our new mini guide we will explain how to correctly reset the engine oil change light of the 2019 Ford Escape. The whole operation takes a few seconds to complete and can be performed by anyone without any kind of problem. First turn on the ignition. Use the directional arrows located on the left side of the steering wheel to navigate the menu and select the "Settings" item. Enter "Vehicle" and then "Oil life reset". Finally, hold down the "OK" button and release it as soon as the reset is complete.


Posted on 17 September 2022 by ScegliAuto



How to reset the service warning light in the Ford Escape?
Ford Escape (2008-2012 / MK 2) The service warning light comes on when we have traveled a large number of km and the engine oil is therefore exhausted. When we find it on our dashb
How to reset the oil light on Ford Escape.
Ford Escape (2013-2019 / MK 3) In this video tutorial we can see how you can reset the oil light on Ford Escape. The first thing you need to do if the oil service light has come on
How to reset the Ford Escape 2 oil warning light
Ford Escape (2008-2012 / MK 2) If the engine oil warning light comes on on the instrument panel of your Ford Escape Mk2 (year 2008-2012) even though you have recently changed the f

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos